This
project resulted in the manufacture
of give-away products along with magazine
inserts. The piece is a 4 color lenticular
of 6.75’’ x 6.75’’
inches, with black printing on the back.
We have manufactured this piece using
75 lpi lenticular plastic with a thickness
of 18 mil. The effect is a real 3D with
a "two" flip effect to demonstrate
the airplane’s radar capabilities.The
lenticular was then attached to a carrier
with fugitive glue and used as a magazine
insert. The glue enabled the easy removal
of the lenticular from the carrier.
The lenticular piece was also designed
to be applied to a metal surface, with
the help of magnetic strips integrated
into the product in the final finishing
steps.All of the client’s bindery
requirements were met and the cardboard
carrier used to do the magazine insert
was printed with the Photogram DRIP
high definition printing technology
for lithographic presses. The carrier
used a 10 pt Cornwall C2S substrate,
printed in four color process,PMS 286
and with a full Sat